|
|
In-circuit Emulators/ In-circuit Debuggers/
ROM Emulators |
 Back |
|
|
|
|
|
| ESA ICE-1 |
 Data Sheet  Sales Enquiry |
|
|
|
| ESA ICE - 1 is a cost effective and versatile development/debugging tool, extremely useful for Educational Institutions, R&D Labs and Industries. It has an RS 232 C port through which it can be interfaced with Host computer systems / CRT terminals. ESA ICE 1 supports a variety of popular 8 bit processors and provides a powerful command set for the development /debugging needs. |
|
|
|
|
| ESA ICE-2 |
Data Sheet Sales Enquiry |
|
|
|
| ESA ICE-2 is an advanced and powerful In-Circuit Emulator which can be used to create a highly sophisticated debugging environment in a cost-effective way. ESA ICE-2 supports all the features ( in enhanced form ) of our earlier popular ESA ICE-1 model and provides many additional useful features like real time trace collection, realtime breakpoints, more informative display of trace buffer etc., ESA ICE-2 has an RS-232 C port through which it can be interfaced to a CRT terminal/Host Computer Systems. When ESA ICE - 2 is connected to an IBM PC/XT/AT compatible Host Computer System, many additional facilities like Symbolic Debugging, Logic State Analysis, Software Performance Analysis, Command Files etc., are available to the user and such an environment can dramatically reduce the cost of development / debugging efforts.ESA ICE - 2 is at present available for 8086/8088 operating in the maximum mode. Support for other popular microprocessors will be available soon. |
|
|
|
|
| ESA PROMJet |
Data Sheet Sales Enquiry |
|
|
|
| PROMJet is a very advanced development tool for embedded systems. It is an FLASH, EPROM and Memory emulator that eliminates the need for programming FLASH memory during an application's development cycle. It replaces the FLASH memory of the system under development allowing the user to load, examine, modify, view and patch the program code directly into the PROMJet's emulation memory. The PROMJet works with an IBM PC or compatible, Apple Macintosh or a UNIX workstation via a standard parallel printer port, serial RS232 port or a TCP/IP Ethernet adapter. The ultra compact design (1.7" x 0.7" x 2.2") that has the same footprint as an EPROM, battery backed high speed RAM (up to 25ns), ultra fast data up/download speed (1 to 4 Mb/Sec.) and jumperless configuration by the software facilitate the user's firmware development. The target system recognizes the PROMJet as if it were an actual EPROM or FLASH memory chip plugged into the target socket. Since the PROMJet functions independently of microprocessor type, it may be used to develop code in virtually any target system that uses a standard DIP, PLCC or SMT JEDEC EPROM or FLASH memory. A write input signal allows the target processor to write to the PROMJet emulation memory to change variables or set breakpoints in the ROM area. Also provided is a second ChipSelect signal to emulate a second memory device. An external RESET and /RESET output signals enable the host to reset the target system on demand. The PROMJet supports wider data buses (up to 128 bit) or multi-ROM targets by daisy-chaining multiple units. The Variable-Voltage option allows PROMJet to operate in any target with a supply voltage between 2 and 5V. This option is built inside PROMJet and does not require any external adapter that increases memory access time. |
|
|
|
 |
|
|
|
|